Making gas cans great again

   / Making gas cans great again #1  

Duds13

Gold Member
Joined
Jan 29, 2022
Messages
450
Location
Charlton, NY
Tractor
Kioti CK2610, Kubota BX 2200
Thank you for your attention to this matter!

 
   / Making gas cans great again #2  
Saw this, great news. Reducing gas can flow to a pathetic dribble helped nobody.

So wait. They are only directing the manufacturers to specifically add vents again. So potentially increasing cost a little bit. And you still must have the spring loaded nozzle? ugh

Glad I have all my old cans around still. You can pry them from my cold, dead hands.
 
   / Making gas cans great again #8  
   / Making gas cans great again #10  
I've not seen one of those "push-in vents" that come with the new nozzles that didn't leak. And half the time the threads on the replacement nozzle don't match my gas cans.
Same here. I will say, the vent seems to leak less over time. I don't know if it's possible the plastic swells when gas hits it or what. Might just be my wishful thinking....

I wonder if going down one size from the recommended drill bit to make the hole would help?
 

Tractor & Equipment Auctions

1987 FRUEHAUF 150BBL ALUMINUM TANKER TRAILER (A53843)
1987 FRUEHAUF...
2016 ETNYRE TRI-AXLE DETACH TRAILER (A53843)
2016 ETNYRE...
2005 JOHN DEERE 310G BACKHOE (A50458)
2005 JOHN DEERE...
ACETYLENE TORCH CART WITH GAUGES AND HOSES (A53843)
ACETYLENE TORCH...
Flatbed Truck Body (A52377)
Flatbed Truck Body...
2015 GREAT DANE ETL-1114-31053 REEFER TRAILER (A54607)
2015 GREAT DANE...
 
Top