hwp
Platinum Member
Does anyone know where I can find tap drill info (soft and hard materials, close and free fit) for machine screws from 0000-160 through 00-90 and 0.5 through 1.0mm? I searched with Google and didn't find what I was looking for.
Machine Screw Tap Drill Info
- Thread starter hwp
- Start date
- Views: 1692
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
Try asking in one of the Machinists forums. One of the professionals there may have a link to something on line. However, the Machinery's Handbook 27th edition probably has that information. I don't have mine here right now or I would look for you.
Home Shop Machinist forum
Practical Machinist forums
Home Shop Machinist forum
Practical Machinist forums
scott_vt
Super Member
- Joined
- Oct 5, 2004
- Messages
- 7,493
- Location
- east wells,vt
- Tractor
- 1986 MF 1040, 1942 Farmall A, 1949 Farmall Super A
Mornin Howard,
I just checked my Machinists Handbook " 19th Edition " a bit old and all I coild find is tap sizes to 1mm. I also got this chart fron Google but probablly not any help to you.
I guess Madrefs idea might be the ticket
Tap Drill Sizes
I just checked my Machinists Handbook " 19th Edition " a bit old and all I coild find is tap sizes to 1mm. I also got this chart fron Google but probablly not any help to you.
I guess Madrefs idea might be the ticket
Tap Drill Sizes
hazmat
Elite Member
- Joined
- Feb 12, 2002
- Messages
- 4,051
- Location
- West Newbury, MA & Harrison, ME
- Tractor
- Kubota L5460HSTC
scotty - you were soooo close but no cigar - thanks turbo
The funny thing is I reached the same page - here was my process:
look in Mark's Mech Eng handbook - no dice
Look in Bosch Automotive handbook - no dice
look in MSC blue book - hmmm they are called minature screw threads - hit google and wala - newman's web page.
Just gotta ask Howard - what on earth are you making/fixing - watches???
- thanks turboThe funny thing is I reached the same page - here was my process:
look in Mark's Mech Eng handbook - no dice
Look in Bosch Automotive handbook - no dice
look in MSC blue book - hmmm they are called minature screw threads - hit google and wala - newman's web page.
Just gotta ask Howard - what on earth are you making/fixing - watches???
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
Interesting. That thread style was adopted in 1958. The very old American Machinists Handbook I have with me was printed in 1955. I'll bet the newer Machinery's Handbook lists those thread types.
OP
hwp
Platinum Member
Thanks for the tips, guys. As Scotty knows, I dabble with model railroading stuff, and some of it gets very fine, especially for an old fellow with poor eyesight and the shakes.
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
Just as a reference, I finally got my 27th Edition of Machinery's Handbook back from my son. There are 6 pages in it containing everything you ever wanted to know about Unified National Miniature Screw Threads (UNM). Now if I could just get a bigger magnifying glass so I could read the tables in the Handbook.
bamatoolmaker
Silver Member
Most fastener supply companys will give you a drill and decimal conversion chart if you ask them.
