OP
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
Lubrication Points
- Thread starter pajoube
- Start date
- Views: 3214
OP
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
OP
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
OP
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
OP
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
OP
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
OP
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
OP
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,132
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Another new member? Welcome to TBN! /forums/images/graemlins/cool.gif
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,132
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Thanks, PJ!
It looks like in photo 2 there is the silver engine on the left, then a cone shaped mount for the hydraulic pump, which appears to be the same pump picture 5. I'm going to guess that the little hoses on top come from the treadle assembly. Picture 8 shows the other side of that pump.
I believe there are two more pumps out in front of this monster pump. They should be the main and aux PTO pumps.
So, they are using a different pump for drive circuit than mine.
Anyway, pretty cool layout.
Again, thanks for the pictures, PJ. /forums/images/graemlins/cool.gif
It looks like in photo 2 there is the silver engine on the left, then a cone shaped mount for the hydraulic pump, which appears to be the same pump picture 5. I'm going to guess that the little hoses on top come from the treadle assembly. Picture 8 shows the other side of that pump.
I believe there are two more pumps out in front of this monster pump. They should be the main and aux PTO pumps.
So, they are using a different pump for drive circuit than mine.
Anyway, pretty cool layout.
Again, thanks for the pictures, PJ. /forums/images/graemlins/cool.gif
