Hey guys I purchased a new XG3140H last fall with plans on adding a grapple for firewood and general clean up. I bought a 3rd function kit from summit and looking for a schematic or image of the correct line for power beyond. I've noticed getting this information for the LS brand is difficult. I have my operators manual and the image shows a different loader valve than what I have. I have included my valve image, there are 2 lines running back, one goes under the seat and the other down low. Any help would be greatly appreciated!
LS XG3140H 3rd function
- Thread starter DustanT
- Start date
- Views: 4635
papachaz
Gold Member
if you don't mind, can you give a few details on the valve? I want to add one to mine, and the least expensive option I've found is from Everything Attachments for $827 (unless they've changed the price in the last few weeks)
I'm not sure about the power beyond line, but I am definitely following this thread
Tymanthius
Bronze Member
I don't have any comments on the 3rd funct valve, but for the grapple, if you've not bought it already, the Everything Attachements ones are really nice. I've torn up a lot of scrub and trash trees with mine. Revised my estimate of 2+ years to clear this crud to 1-1.5 if I can dedicate the time to it.
MaineGuy1
Silver Member
- Joined
- Nov 9, 2018
- Messages
- 196
- Location
- MAINE
- Tractor
- Kubota BX 25D, Massey Ferguson 1735M hydro cab
Not sure if this would work for you. Tractor Mike has a video on youtube about them.
https://www.amazon.com/Hydraulic-Mu...VJ0TKRY3G48&psc=1&refRID=XG4E0RXHCVJ0TKRY3G48
Walter L
Gold Member
- Joined
- Nov 19, 2006
- Messages
- 348
- Location
- Delhi LA
- Tractor
- LS XG3135, Foton FT404,Farmtrac 555 ,Kubota L245H offset garden tractor Mahindra 2660 cab tractor
Dustan that 3 function kit looks good and the price is good but do you know if our hyd pumps puts out less than 13GPM or more. Cant find the answer in my op manual?
Ifound out that our pump is 8GPM just for everyone info.
Last edited:
Implement pump (gpm): 8.2
Steering pump (gpm): 5.5
Total flow (gpm): 13.7
Steering pump is what feeds the hydro tranny from the line layout on the schematics. The power beyond only sees the 8.2 GPM. I am going to ask my dealer about it and see what he thinks, no one seems to know much about the LS tractors. I get that deer in the headlight look when I ask technical questions, one thing I hate about the LS brand its so closed lipped.
Steering pump (gpm): 5.5
Total flow (gpm): 13.7
Steering pump is what feeds the hydro tranny from the line layout on the schematics. The power beyond only sees the 8.2 GPM. I am going to ask my dealer about it and see what he thinks, no one seems to know much about the LS tractors. I get that deer in the headlight look when I ask technical questions, one thing I hate about the LS brand its so closed lipped.