....that's even more strange...so you have to run it backwards ? ...my neck hurts just thinking about that. If you can turn the tines around and drive it forwards it would probably be a lot more efficient
Love my rake???
- Thread starter spechols
- Start date
- Views: 2355
....that's even more strange...so you have to run it backwards ? ...my neck hurts just thinking about that. If you can turn the tines around and drive it forwards it would probably be a lot more efficient
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 65,637
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
If you turned the tines around and drove forward, the tines would dig in and the machine would try and drive up over them.
If you put gauge wheels out in front of the tines, then you could drive forward.
That makes sense, mine does have the gauge wheels..I forgot until you said that
m5040
Veteran Member
- Joined
- Nov 23, 2008
- Messages
- 1,010
- Location
- CT
- Tractor
- Kubota M6040 L2250, JohnDeere 310D, Ford 841 Elenco, Ford 961, Trapmaster, PT180 w/LM bucket and 45" brush cutter, PT1430 Deutz w/grapple bucket, Antonio Carraro Tigrecar 6500. John Deere 5300. Former owned Steiner 430 max, Goldoni REV Maxter 7
It is one of the few attachments that you use with tractor in reverse. The beauty of the PT is all the other attachments that are right in front of you as you drive forward, unlike a 3pt hitch which hurts my neck looking back.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 65,637
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
I think a rake like that on the PT would be handy for cleaning out ditches or under pine trees.
m5040
Veteran Member
- Joined
- Nov 23, 2008
- Messages
- 1,010
- Location
- CT
- Tractor
- Kubota M6040 L2250, JohnDeere 310D, Ford 841 Elenco, Ford 961, Trapmaster, PT180 w/LM bucket and 45" brush cutter, PT1430 Deutz w/grapple bucket, Antonio Carraro Tigrecar 6500. John Deere 5300. Former owned Steiner 430 max, Goldoni REV Maxter 7
I would love to try it on leaves in the fall. It is on my list to go to TSC and buy some spring rakes, bolt them on an angle iron and make one.
RidgeHiker
Gold Member
- Joined
- Mar 23, 2011
- Messages
- 390
- Location
- Upper California Mountains
- Tractor
- Kioti DK5010 with KL5510 Loader & 72" Bucket. Kawasaki Mule Pro MX SE with 66" snow plow.
It looks a lot like pine straw rakes that go on 3 point hitches.
5 FT Pine Straw Needle Rake for Cat 1, 3 Point
Pine Needle Rakes | Pine Straw Rakes | Prepare Pine Needles For Baling with the Everything Attachments Pine Needle Rake 72" Length
