Looking for ideas on Hydro top link support

[CalG]

I've got the B2601 set up for a hydro top link, have the cylinder "mostly" ready.
But even a top link from Tractor supply doesn't fit the winky support wire offered by the factory.

What great solutions have you come up with? I have been using a loop of clothes line cord. (para cord what ever) It works OK, but not something that can be secured or released from the seat.

Looking for examples before I bend up some wire...

 

[Cycledude]

I have also been using a loop of cord to support the hydraulic top link when not using it. Seems to mostly work very well for me. Yes I need to dismount the tractor in order to hookup or disconnect the cord but I have no complaint about that. A better system would be nice but I currently have no ideas how to improve it.Will be watching this thread for new and better ideas .

 

[ptsg]

This was my solution. A link from an old chain and a hose clamp. The hook is the original top link holder. It's been holding perfectly. I think I've since rotated the chain link so it sits horizontal though.

 

[RjCorazza]

I use a thick rubber bungee cord to support the hydraulic toplink when not in use. It works well.

 

[Jwmaustin]

I've got the B2601 set up for a hydro top link, have the cylinder "mostly" ready.
But even a top link from Tractor supply doesn't fit the winky support wire offered by the factory.

What great solutions have you come up with? I have been using a loop of clothes line cord. (para cord what ever) It works OK, but not something that can be secured or released from the seat.

Looking for examples before I bend up some wire...

I just use a quick hitch.

 

[Tinhack]

I just use a quick hitch.

You beat me to it.

It took me until the pic from @ptsg to figure out what a "winky wire" was.

 

[ptsg]

You beat me to it.

It took me until the pic from @ptsg to figure out what a "winky wire" was.

Maybe this gives a better idea on the "winky wire". Don't mind my tractor's balls just hanging out in the wild.