Looking for a name of an item

[davedj1]

peened bushing?

 

[Gary Fowler]

Looks like a piece of tubing with the ends flared. A tubing flaring tool might work. I do think buying a new lock is the way to go.

 

[zoedog2012]

Insert nut?

 

[Barnbuilder]

Go to Boltdepot.com and look at *** bolts and mating screws see if that will work.

 

[TractorGuy]

View attachment 521300View attachment 521301View attachment 521302
What the problem is the latch is seized to the will call it a rivet again as the latch turns it turns the rivet.
The spring is not strong enough to flick open the latch due to too much friction.

Yep, you need new latch assemblies.

 

[rasorbackq]

No parts available for the cover. What I did was drilled out the hollow rivet Inserted a ss 5/16 tube inside . Flared one end before inserting and then enlarged the other end with a flared punch neck.
Good for another 15 years.

 

[JB13502]

My money's on 16 years (at least). :thumbsup:Outstanding!