Looking for a bulkhead fitting

[Monster5601]

First off, I have little idea what I'm talking about, I've done research and reading so I think I'm calling everything correctly but, if I were, then I should be able to locate the bulkhead fitting I need or a way to do what I what to do.

I am replacing both of my rear remote circuits from the Parker 9006 (push on pull off) couplers to a more traditional coupler/collar. What I have is a hydraulic hose attaching to an adapter that fits into the hydraulic coupler. The coupler side is a 1/2-14 NPT, the hose side is a 3/8-19 BSPP with an internal 55 degree flare (see picture). I would like to find this fitting in a design that could be mounted in a plate I can frabricate to replace the silly and hard to use push to connect and pull to disconnect system now on the tractor (see other picture).

If you know where I can find the fitting I'm looking for or perhaps another method I can use to achieve the same results, I would be very appreciative.

 

[LouNY]

check on Surplus Centers web site they have several bulkhead fittings

 

[Monster5601]

check on Surplus Centers web site they have several bulkhead fittings

Let me add, that I have searched all the sites Google has brought up without success. Either the part I need isn't made or I'm using the incorrect search criteria. This is the help that I am looking for.

 

[Like Tractors]

First off, I have little idea what I'm talking about, I've done research and reading so I think I'm calling everything correctly but, if I were, then I should be able to locate the bulkhead fitting I need or a way to do what I what to do.

I am replacing both of my rear remote circuits from the Parker 9006 (push on pull off) couplers to a more traditional coupler/collar. What I have is a hydraulic hose attaching to an adapter that fits into the hydraulic coupler. The coupler side is a 1/2-14 NPT, the hose side is a 3/8-19 BSPP with an internal 55 degree flare (see picture). I would like to find this fitting in a design that could be mounted in a plate I can frabricate to replace the silly and hard to use push to connect and pull to disconnect system now on the tractor (see other picture).

If you know where I can find the fitting I'm looking for or perhaps another method I can use to achieve the same results, I would be very appreciative.

View attachment 565083 View attachment 565084

Just curious, how on God's green earth did you come up with a British fitting? ****, we beat those people back in the Revolutionary War!

 

[downsizingnow48]

Discount Hydraulic has BSPP bulkhead fittings. You will also need an adapter to get from the BSPP bulkhead fitting to the NPT coupler. I study their listings, and those of Surplus Center, to find the simplest way to make a hydraulic connection.

Discount Hydraulic Hose - Home

Surplus Center

 

[3Ts]

I believe this is what you're looking for:
Kramp Danmark- Quick release coupling female SKP-F (bulkhead)

I've seen them in the US as well, but can't find my link for them now. Worst case you may have to use a bulkhead fitting and adapters to get there like:
Quick Release Hydraulic Coupling Set 1 2 BSP

A hydraulic shop should be able to get them for you.

 

[LouNY]

Or just weld a coupling onto your mounting plate, screw your fitting into one side, mount your quick connect on the other side

 

[ddbackhoe]

First off, I have little idea what I'm talking about, I've done research and reading so I think I'm calling everything correctly but, if I were, then I should be able to locate the bulkhead fitting I need or a way to do what I what to do.

I am replacing both of my rear remote circuits from the Parker 9006 (push on pull off) couplers to a more traditional coupler/collar. What I have is a hydraulic hose attaching to an adapter that fits into the hydraulic coupler. The coupler side is a 1/2-14 NPT, the hose side is a 3/8-19 BSPP with an internal 55 degree flare (see picture). I would like to find this fitting in a design that could be mounted in a plate I can frabricate to replace the silly and hard to use push to connect and pull to disconnect system now on the tractor (see other picture).

If you know where I can find the fitting I'm looking for or perhaps another method I can use to achieve the same results, I would be very appreciative.

View attachment 565083 View attachment 565084

Just in case, here's a good article for identifying different types and sizes
Royal Brass and Hose Blog

here's a couple places to look

Hydraulic Adapters | HydraulicsDirect.com
Pressure Connections Corp - JIC BULKHEAD FITTINGS

 

[mrmikey]

Or just weld a coupling onto your mounting plate, screw your fitting into one side, mount your quick connect on the other side

Beat me to it, i was going to say the same thing.........Mike

 

[Monster5601]

Just curious, how on God's green earth did you come up with a British fitting? ****, we beat those people back in the Revolutionary War!

I didn't, this is the rear remote kit straight from Kubota, they did it. From what I understand from reading, we are about the only country that doesn't use the British fittings.

Or just weld a coupling onto your mounting plate, screw your fitting into one side, mount your quick connect on the other side

This looks like the best solution since taking the adapter path I end up with a train of adapters that is too long to be workable.

Thanks, guys.

 

[Wagtail]

... we beat those people back in the Revolutionary War!

And they re-payed the compliment in the War of 1812.

I see that you've fixed the Presidential residence since then... it looks very nice.