Loaded tires psi

   / Loaded tires psi #1  

CK732

Member
Joined
Dec 26, 2024
Messages
38
Tractor
Massy
I have a problem when I put the chains on the back tires after I put on the tightner.
I'm thinking it pulls the chain to tight or the tire needs more air.
.
 
   / Loaded tires psi #2  
I carry about 30 pounds in mine
 
   / Loaded tires psi
  • Thread Starter
#3  
I would have to buy the gauge to check loader tire to find out how much is inside.
 
   / Loaded tires psi
  • Thread Starter
#5  
The size should be on this.
 

Attachments

  • 20250101_094316.jpg
    20250101_094316.jpg
    4.4 MB · Views: 118
   / Loaded tires psi #6  
14.9-28's should be good at 12-20 psi depending upon the load being carried.
Being liquid filled has no bearing on the tires load capacity;
these are 14.9-24's which would actually have less of a capacity then the 28's
1735959319233.png
 
   / Loaded tires psi #7  
I have a problem when I put the chains on the back tires after I put on the tightner.
I'm thinking it pulls the chain to tight or the tire needs more air.
.
The problem isn't with the tire or it's air pressure. As I mentioned in your other thread, the chains need to be shortened.
 
   / Loaded tires psi
  • Thread Starter
#8  
OK how do I shorten the chain? What end do I start at.
 
   / Loaded tires psi #9  
   / Loaded tires psi
  • Thread Starter
#10  
The twisted wire is to keep the chains they do damage when they come off.
I wish I had cams on the chains you turn up and hook into a link. In the Spring I will buy new chains for the tire size.
 

Tractor & Equipment Auctions

SKID STEER ATTACHMENT GRAPPLE GRUBBER (A58214)
SKID STEER...
2017 Mitsubishi Mirage G4 Sedan (A56859)
2017 Mitsubishi...
2017 Ford F-150 4x4 Crew Cab Pickup Truck (A56858)
2017 Ford F-150...
2014 Timpte Hopper Bottom (A56438)
2014 Timpte Hopper...
Toro (A56857)
Toro (A56857)
LOT: (1) Steel Plate Sheet, 1/4" Thick, 48" x 96", (1) Steel Plate Sheet, 1/4" Thick, 41" x 96" (A59076)
LOT: (1) Steel...
 
Top