lift arms

[Bob Morrow]

I have a David Brown 1212 with a lift arm control problem. When you push the control lever to lower the arms they come up. Any ideas?

 

[Massey_lover]

Try posting this in the Case forum too, I believe the 1212 DB and the 1210 Case are the same tractor... The only thing I can think of (and don't take my word on it, I've never worked on either brand) would be if you have a diverter valve or something similar to send power to your remotes, it could be malfunctioning (leaking through the spools) or in the wrong position. Unless (if it's like the Massey's), you've had the lift cover off, in which case the levers that actuate the valve body on the pump could be in the wrong spot. They can be a PITA to get back where they belong

 

[bmcheek680]

I have run into this with case david brown and a allis chalmers. Have you made sure that the depth control linkages are free and working properly?

 

[KGBargholz]

Did you get the problem fixed? I ask because I have the same issue with my DB1210 at this moment.