Imold
Platinum Member
- Joined
- Jul 23, 2019
- Messages
- 806
- Location
- West Central Mn.
- Tractor
- MF GC1705, Cub Cadet RZTL, Husqvarna Rider.
Ok so I have cut down a area of sumac with the Piranha bar and I have run over the area with my box blade using teeth to rip up as much as possible but still need to do some more cleaning before I dump class 5 gravel, here is how it looks now.

I will also be prepping two more areas, one will be 35x75 feet for home and the other 32x32 feet for garage, both areas are basically low cut pasture grass, again I will rip it up with box blade teeth.
I would like to know if buying a 72 inch Land Rake would be worth it for finishing work, it will also be used on a 300 plus foot gravel driveway and cleaning yard of debris if needed. I think the GC1705 would handle a 72 inch land rake if I went with that one.
Jim.

I will also be prepping two more areas, one will be 35x75 feet for home and the other 32x32 feet for garage, both areas are basically low cut pasture grass, again I will rip it up with box blade teeth.
I would like to know if buying a 72 inch Land Rake would be worth it for finishing work, it will also be used on a 300 plus foot gravel driveway and cleaning yard of debris if needed. I think the GC1705 would handle a 72 inch land rake if I went with that one.
Jim.
Last edited: