L2600 Trans/Hydro Fill Question

[TX Ags]

Hello, I just bought a L2600 and I'm going to change the trans fluid. This is my first Kubota...the manual shows 4 drain plug locations. It also shows two fill locations: one in front of the seat (on top of the trans) and one behind the seat. I assume its a "common reservoir" so can I can fill it from either location? Or do I need to fill both locations? Its a DT transmission. Thanks for the help.

 

[Fallon]

Pretty much all CUTs have a common hydrauluc sump in the transmission housing & use hydraulic fluid to lubricate the transmission. There are multiple low spots. Usually 2 in the final drives on the axles & usually 1 or 2 in the middle of the transmission. Fill wherever is easiest, as long as they all go into the common sump.