L2250 remote

[bobmcbride731]

I have an L2250 and want to add a remote valve to angle the rear blade. Where can I connect the valve?

 

[s219]

I have an L2250 and want to add a remote valve to angle the rear blade. Where can I connect the valve?

Do you have a front loader? If so, look for the power beyond port on the loader valve which is probably plumbed to run to the 3-pt hitch. You can put your remote valve into the power beyond loop after the loader and before the 3-pt.

If no front loader, then intercept the power beyond flow where it exits the main hydraulic outlet and goes to the 3-pt hitch. Insert the remote valve before the 3-pt.

 

[J_J]

Your tractor has an option for a remote outlet.

You also have two hyd blocks, one has the relief valve , and the other is for the loader or whatever, but if you do not have a loader, you can use the small hyd block.

There is even one other option and that is to cut the delivery line and use compression fittings and make lines to feed a remote valve with QD outlets.

Go to Messicks Kubota and enter your tractor data, and they will send you a PDF .