Kubota B7610 quit running

[shear280]

My wife was moving some dirt and the engine stopped. I've checked all the safety switches, no power at the clutch switch. I'm in need of a wiring diagram.

 

[Muhammad]

Welcome to TBN.

 

[hr3]

Have you checked the pto lever.. my wife hits it all the time..

 

[shear280]

I have traced the wiring back from the starter to the key switch. The controller 6c190-55512, (new #55513) seems to be the culprit. I need to find out what turns that output on. I have checked all the safety switches for power and continuity. It's tough to trace without diagrams.

 

[Depmandog]

Glad to have you as a member! See you in the forums!!

 

[Egon]

Can't help with original problem but would suggest a liberal application of Elecrolitic Grease to all connections as you work your way through checking.

 

[Thomas]

I take it you have check all the fuses,lose +,- wires.

 

[shear280]

I have checked all the fuses, connections and cleaned and lubed as I went along. I just need to know more about the controller and the wires from that. I don't want to spend $150 for that part until I can track the sensors in to that device.

 

[newbury]

I'm sure you checked it but what about the seat sensor?
When you get off it cuts power.

Also this may do better in the Kubota Owner Operator forum.

 

[kensnelling]

Welcome to the forum from Oklahoma.

Ken