Just another junk chainsaw

[xyz123]

The dealer, and I use that word loosely, got another piston in. Told the SIL that that's the way they come, you have to file the bosses to fit the side to side measurement of the con rod. Sounds like a load of crap to me, never heard of such a thing.
I may order a piston from scamazon just for the halibut and see what I end up with.

What saw was it again? Sounds like BS.

I'll check some of my spots for better aftermarket stuff.

Last afm piston I put in a G466 aka MS460.

 

[xyz123]

I went back and found it.

See if you can find one of these. Meteor

45mm Meteor Piston for Husqvarna Model 254

Meteor Part No. 2293, Replaces OEM: 503 50 37-01

northwoodsaw.com

 

[mrmikey]

Thanks XY. Can't find it in Canada anywhere that the shipping is ridiculous.
I'll order one from scamazon and see what happens.

 

[xyz123]

Thanks XY. Can't find it in Canada anywhere that the shipping is ridiculous.
I'll order one from scamazon and see what happens.

I will ask my repair group where the Canada guys get them.

 

[xyz123]

@mrmikey starting to come in. One guy says he buys meteor from Sawparts is from Brampton on.

I dont see a meteor kit. Just some other one. SawParts Canada

 

[mrmikey]

Just looked and there's no Meteor kits like you said but I figured what the heck, I'll give it a go..."till it got to the payment part and they only use PayPal which I got scammed before by. Amazon it is then unfortunately.
Thanks for al the help XY, much appreciated.....Mike

 

[xyz123]

I'll update as others wake and post.

 

[xyz123]

@mrmikey this guy said he is in Quebec. = Im am slowly becoming a Hyway/Farmertec/Meteor dealer in Canada and have Husqvarna 254 pistons in stock

Told him you dont have PP. Working on email for ya.

 

[xyz123]

@mrmikey sending guys email in message.

 

[34Willys]

Just wanted to say thanks for being generous with your knowledge.

Patrick

 

[mrmikey]

Got a reply from him and passed the info onto the SIL to see what he wants to do.
Thanks again XY for the info.

 

[xyz123]

Someone asking for some of my plastic saws for a race build in 42cc wild thing class.

Pulled these off the shelf for a guy out of state for a possible porting build. Both runners stock and already gone through with echo oem lines. I know the 2175 has new carb kit. 260 cant recall owned it for so long.

The chrome bore 260 42cc with antivibe my favorite of the plastic saws in their brand.

So took off the shelf for him looked over put in bigger box and off they went to a new home for a race class build.

 

[xyz123]

Just to show some of the past builds I have seen by guys in my group.

 

[xyz123]

I swore I wouldnt pick up anymore plastic saws, since sold those other 2 this week.
Yet here we are Poulan 2375 the better ones before ruined by strato.

But since they are racing the wild things again this year. I made a hour round trip.

I thought I better grab some as I seen them. Just in case for folks building them. One was just a tad to far to make me drive to it.

Only the better non strato ones. Like 2375 etc. Also some of the craftsman versions in non strato 42cc to have their pistons cylinders, cranks etc too if needed.

They have to be in the wild thing colors and cases etc at 42cc max.

 

[xyz123]

Just so you know. Chris at saw salvage aka Duke's has aftermarket 2511 closed port cylinder FS for about a week now. Oem used closed. https://www.sawsalvage.co/collectio...its-echo-cs-2511t-cs-2511p-closed-port-design

Guys in my chainsaw group like what they see in them.

Just another option out there now.

Still has the open port ones too that was used on clones. https://www.sawsalvage.co/collectio...der-kit-fits-echo-cs-2511t-cs-2511p-open-port

 

[HawkinsHollow]

Bought this bark peeler to use on sawmill logs. Was going to put it on an old makita saw I had but the pulley would not fit. A buddy gave me this old poulan a while back, so I thought I would see if the pulley would fit. It was closes but there was a little slop where the spindle came though the pulley so I had to make a bushing to tighten it up. Put some new gas and a. little seafoam in the saw and BOOM started right up and the bark peeler works perfectly. GOTTA LOVE FREE CHAINSAWS!