Just another junk chainsaw

[Hay Dude]

Happy New year

Little off topic, but has anyone seen an air filter (foam and plastic cartridge assembly) like this before? It’s for a Ryobi gas tool of a by-gone era.
Although the Ryobi tool is discontinued, I wondered if any other 2-cycle gas tools used this same air cleaner?
It’s the white piece on the left. Fits on a Walbro carb.

 

[kenmbz]

Can you disassemble and replace the filter bits instead of the whole unit?

 

[xyz123]

New owner of the echo 3510 loves it so far. Older guy I traded it to for the easy start stihl. = Thanks,. I pulled on it twice and it fired off.
SKEERED me a little

 

[xyz123]

I think that stihl 250c easy start I traded for will clean up nicely.

Hopefully be easy to start for dad too. Little harder then the easy start 180 I gave him years back.

Going to replace those purge bulb lines with echo oem ones.

New purge bulb and Denso plug put in to check things. Start up in couple pulls.

Might get him a new muffler set too.

 

[xyz123]

Line routing for purge

 

[xyz123]

New muffler ordered.

Muffler was getting loose and caused some melt on the plastic. But nothing through as far as I can see.

Piston is sweet

 

[xyz123]

250C Just so you know if you come across one with H L and I on zama. Their 250c IPL shows it. 24 L, 25 H and 23 I and fully adjustable too. Another guy in my group said he just noticed same thing.

Was just the walbro 215 one.

Trash yellow lines gone now too.

 

[xyz123]

Also just to show. The 250c manual does show the walbro and zama fully adjustable carbs too.
Not just the zama non H ones shown in IPL.

Lower is what this saw has and what others in my group has seen in 250c they worked on recently.

 

[xyz123]

Before putting back to show the L up there in handle with screwdriver and H back. I down low.

 

[Hay Dude]

Can you disassemble and replace the filter bits instead of the whole unit?

Only thing I have been able to do so far is buy filter foam blocks and try to cut a similarly sized piece out and press it into the plastic housing.

 

[xyz123]

Muffler shows Sat delivery. Will know more then.

Found what I was missing on IPL. #12

Pan head screw DIN84-M4x5-8.8

Time to run to run to hardware store if I cant find something to work or make one.