Just another junk chainsaw

[xyz123]

Farmertec is having a good sale right now. They have the 2511 for $50 too. Thinking about picking up the 395.

Edit - apparently the sale items are not the US stock which is a different price...

Super Weekly Deals from China, Super Weekly Deals Manufacturer & Supplier - Farmertec

Super Weekly Deals offered by China manufacturer Farmertec. Buy high quality Super Weekly Deals right now!

www.farmertec.com

That 49 price is before China shipping by slow boat that will put it over the 99 saw shipped cost from NJ warehouse. Just so aware of that.

 

[xyz123]

Shows around 3pm this rain might slow up so I can film. 2511 muffler testing.

Putting new loop on oem one first.

Need to flip log around. Noticed to much variations in the end piece for first 3 mufflers if did 3 cuts each. Other end was close for way longer length.

 

[xyz123]

2 done so far on oem.

Uploading to my group as I go, but also boobtube so can link here later.

 

[xyz123]

@JeepHead Egan pipe was way ahead of rest. PSS V2 was next and reminded me of the egan in acting and sound etc. WSC was last on the OEM. Only one it would have beat was the stuffed up OEM stock muffler.

So on clone 2511 I only tested the open clone muffler with small pipe and compared to egan pipe to see.

 

[xyz123]

Clone 2511 with egan pipe v/s clone open small pipe. Egan was 2.3 sec faster per cut.

Working on videos.

I may try the pss v2 and wsc on it later but done for now.

OEM and clone ext exits

 

[airbiscuit]

@JeepHead Egan pipe was way ahead of rest. PSS V2 was next and reminded me of the egan in acting and sound etc. WSC was last on the OEM. Only one it would have beat was the stuffed up OEM stock muffler.

So on clone 2511 I only tested the open clone muffler with small pipe and compared to egan pipe to see.

Great video! Looks like the Egan Pipe is the undisputed champion! Looking forward to the clone test vid. Where can we find your group?

 

[xyz123]

Great video! Looks like the Egan Pipe is the undisputed champion! Looking forward to the clone test vid. Where can we find your group?

Not on clone. That was OEM.

PSS V2 was best on clone. So other guy is going to try them on ported clone to see.

Could have been luck of test cuts. We trying to figure out.

I would have thought V2 would have been closer to Egan on OEM one too.

 

[xyz123]

Instead of shaving the back mount on cnc mufflers to run on clone 2511. Like Scotty showed.
I decided to run 2 gaskets since no heat shield used on clones to make up that space.
PSS V2 on the Farmertec 2511.
Egan pipe going back on my oem.

 

[xyz123]

Farmertec 2511 clone muffler test. PSS V2 was best.

PSS V2, Egan and the clone open pipe muffler.

I even put screen in on PSS V2 as I was going to leave it on the clone too.

 

[xyz123]

Took out the slowest cuts of each of the clone cuts out and took the fastest cuts timed to compare.

IMHO Egan or a PSS V2 best for OEM or clones.

Stock clone pipe open muffler 13.41
PSS V2 10.70
Egan 11.16