Just another junk chainsaw
- Thread starter xyz123
- Start date
Found out saw came from Oregon close to 20 years ago. Noticed it had some of their style porting theories in it.
Before clean up. Lucky no transfer. Then after cleaning and quick fresh crosshatching for new rings and piston when arrives. I'm talking just seconds on the crosshatching each way to remove glaze etc. Also can do by hand with emery clothe.
Before clean up. Lucky no transfer. Then after cleaning and quick fresh crosshatching for new rings and piston when arrives. I'm talking just seconds on the crosshatching each way to remove glaze etc. Also can do by hand with emery clothe.
Much better getting rid of that carved up piston in that 394. New piston kit, cylinder cleaning.
Back together and test cut with and tuned.
Much better throttle response etc. Old voodoo piston IMO was holding back a tad.
Back together and test cut with and tuned.
Much better throttle response etc. Old voodoo piston IMO was holding back a tad.
While I had that 394 down for new piston etc above.
I had ordered one of those pistons kits for the G395. The $4.25 piston that comes in the Farmertec is hair off specs. Still runs good and great psi. But makes alittle noise from being out of spec.
I had ordered one of those pistons kits for the G395. The $4.25 piston that comes in the Farmertec is hair off specs. Still runs good and great psi. But makes alittle noise from being out of spec.
cqaigy2
Super Member
Out of spec? Does the piston slap?
Thats what you can hear slap and look at intake skirt closer.
Only difference is the SawSalvage Dukes flat top piston kit added with their rings used too. Not even half tank through it.
Other with lower psi is the Farmertec $5 piston with caber F cast rings with less then 2 tanks. The piston that is not to specs. Like 55.86 compared to 55.94 55.95 55.96 A AB B
Base gasket still used. G395xp .045
Other with lower psi is the Farmertec $5 piston with caber F cast rings with less then 2 tanks. The piston that is not to specs. Like 55.86 compared to 55.94 55.95 55.96 A AB B
Base gasket still used. G395xp .045
Raul-02
Veteran Member
- Joined
- Aug 23, 2021
- Messages
- 1,414
- Tractor
- kioti DK4710 SE HST CAB
Chain saws eh? I need a part and I'm having a hard time finding it
Echo cs 280 E starter cover. Mine broke. If you have one and want to sell, contact me please.
images
Echo cs 280 E starter cover. Mine broke. If you have one and want to sell, contact me please.
images
Traded one of those away to a guy I know for some loops of chain. Didnt care for it.Chain saws eh? I need a part and I'm having a hard time finding it
Echo cs 280 E starter cover. Mine broke. If you have one and want to sell, contact me please.
images
I'll let you know if I see a parts saw.