Just another junk chainsaw

   / Just another junk chainsaw
  • Thread Starter
#1,191  
Stock saw testing by Joe on dyno.

Dyno test Husqvarna 592 xp vs Stihl 661c vs Husqvarna 395xp vs Stihl ms 660.

 
   / Just another junk chainsaw
  • Thread Starter
#1,192  
Poulan 415 quad port 65cc that was sold with 24" new. Sold it to a friend needing a saw to run a 24" on yesterday.

This saw can also take the 71cc 77cc 83cc cylinders.


p415solddddddddd.jpg
p415solddddddddddd.png
p415solddddddd.jpg
p415solddddd.jpg
p415sold.jpg
 
   / Just another junk chainsaw
  • Thread Starter
#1,193  
585 592 carb kits

Walbro released these type back in 2017.


h585592carbs.jpg

 
   / Just another junk chainsaw #1,194  
Back in the day I had a Poulan 3400 counter vibe and it was a great saw as long as you didn't shut it off. It was very bad to vapor lock you had to put gas in it while it was running. After hearing what you guys are saying maybe they are sought after today but I sure didn't care much for it back then.
 
   / Just another junk chainsaw
  • Thread Starter
#1,195  
3400 was bare bore 56cc. They dont bring much. 50-75. Even the more desired one for collectors sold as a 3.0 but really 3.4 only brings 100-125 PHO.

3800 bare bore 61cc
3700 chrome bore 61cc
4000 chrome bore 65cc

Those 3 above more wanted then a 3400 3.4. But the 3400 parts can be used for others. It is actually worth more in parts alone.

I sold this 3400 runner to a local for 50.

Never ever seen one of these varpor lock myself and owned many. Maybe a bigger issue?

p34002000.jpg
p340020.jpg
 
   / Just another junk chainsaw
  • Thread Starter
#1,196  
That look when a local sunk the fresh 670 build in pin oak. Just 20" buried in a 26" piece. Only on 2nd tank and set rich still.

Took from video and it was priceless the way he snapped his head around.


j670pinoakk.jpg
 
   / Just another junk chainsaw
  • Thread Starter
#1,198  
Haha, this the same saw? Look.

The 670 champ I redid. Then put a full wrap on it after I found one when I wasnt looking. Was just looking for a outer oem spike at time.
Not really liking this style full wrap myself. But has it's purpose. Like the 372 full wrap set ups better.

j670zzzzzzz.jpg
j670zzzzz.jpg
 
   / Just another junk chainsaw
  • Thread Starter
#1,199  
G288xp parts have been copied and released now. Can get the orange and blue high top set ups.
They sell whole orange kit or all blue prebuilts.
Help those folks that have the old saws just setting but cant get parts.

Orange one from a kit build a guy did on FB


g288orangee.jpg
g288bbbbb.jpg
 
   / Just another junk chainsaw
  • Thread Starter
#1,200  
The FT high top 288 is just like the OEM ones with 2 places for air. Come in blue and orange.

The other aftermarket ones being sold out there are like the eliminator high top ones with only the fly area for air.

Just to show for those buying.



g288htttt.jpg
g288httt.jpg
g288htt.jpg
h288htoem.jpg
h288htfly.jpg
h288htmatts.jpg
 
 
Top