Just another junk chainsaw
- Thread starter xyz123
- Start date
- Views: 551901
LD1
Epic Contributor
Here is the 6400 oiler. A bit hidden and is indeed only a quarter turn adjustment. You possibly have some sawdust/oil mix packed in the hole blocking view of it.
Treemonkey1000
Veteran Member
Hey thanks LD1 I looked all over that thing yesterday trying to dial it down. I have only run about 9 tanks of fuel through this thing so it isn't too dirty yet. I will take a look at it tomorrow after Church. The oil is empty before the gas so I don't want to burn up the bar or chain.
Got it to work after you downsized it. I downloaded to hd and going to upload to my youtube video account for ya.
Then just use that link to post where ever. Title name dolmar 116si I'll post a link here and chainsawrepair.
LD1
Epic Contributor
Perfect. Thanks. A link here is really all I am after. Not many people have ever heard of the 116si. But it sure is a sweet old saw. Wish they still made em like that:thumbsup:
Here is the thread on CR site if you want to give them some info too. http://chainsawrepair.createaforum.com/dolmar/dolmar-116si-video/new/#new
LD1
Epic Contributor
Just FYI, that is a video that I shot with my stock 116SI, with 16" bar and full chisel chain. Wood was approx. 14"-15" diameter tapering down to 11-12" diameter by the end. Ash BTW.
Just though I would share what the 60cc 116SI could do. It is what a 60cc saw "should" look like.
Thanks for taking the time to upload and post for me xyz123:thumbsup:
Just though I would share what the 60cc 116SI could do. It is what a 60cc saw "should" look like.
Thanks for taking the time to upload and post for me xyz123:thumbsup:
Bluegill2
Veteran Member
- Joined
- Jan 21, 2012
- Messages
- 1,876
- Location
- Success Missouri
- Tractor
- Kubota L3800DT, L3750DT Shuttle
I've been wanting to register to ChainsawRepair, but it wouldn't let me last couple times. I think I'm in this time...
Looks like a good forum!
Looks like a good forum!
LD1
Epic Contributor
It does indeed look like a good forum. I registered there when he first started. Its a bit slow, but growing. Takes time to get numbers and posts like TBN I guess.......
Unfortunately, I dont make it there much. I already waste too much time here:laughing: I dont want to get too addicted to any other forums. But they do have some really smart guys over there.
Unfortunately, I dont make it there much. I already waste too much time here:laughing: I dont want to get too addicted to any other forums. But they do have some really smart guys over there.
LD1
Epic Contributor
Oh, and bluegill, you really need to get you some dolmar saws:laughing:
