joystick conversion

[Rocketman.tractorbynet]

any help here is greatly appreciated. I have a b7100 w/FEL and it has the two handle hyd controls. I would like to convert it to a joystick. I found something on ebay. can anyone tell me if I can do this (conversion) and will this item on ebay work?
item number on ebay......260457398698

http://cgi.ebay.com/ws/eBayISAPI.dl...98698&_sacat=See-All-Categories&_fvi=1&_rdc=1

 

[Willl]

It probably would, but without specs on it I'd be concerned about it's flow rate capacity.

Can you find any info on it ?

Does one of the circuits have 'float' ?

 

[J_J]

Here is one that has float, PB, and 10 GPM.

https://www.surpluscenter.com/item.asp?UID=2009080221450899&item=9-7401&catname=hydraulic

 

[kennyd]

Welcome to TBN

Do yourself a favor, get a NEW one with a warranty from a reputable place like the Surplus Center.

Look at these two:

9-7401 ( I think this is the same one on eBay without the rust though...)

9-7694

 

[welderboy14]

i just orderd two of theis joysticks for the backhoe i am building. it may work for your FEL Standard Hydraulic Cylinders product number 220-905

welderboy14

 

[AndyF]

Have you thought of making the bracket to modify the valve you have now? The valves can usually be setup both ways. I would think with a little work you could modify cheaper than buying another valve, of course this depends on the tools you have to work with.

 

[J_J]

I have added two post here, and they disappeared .

 

[Rocketman.tractorbynet]

WOW, thanks for all the good info. I especially like the idea of modifying what I already have., like AndyF suggested, Can anyone share more of how that is done?

 

[J_J]

WOW, thanks for all the good info. I especially like the idea of modifying what I already have., like AndyF suggested, Can anyone share more of how that is done?

One of the guys on here made his own joystick setup. Here are some pictures.

 

[J_J]

Some manufactures make joystick kits for their valves. This one is for Prince valve. What brand valve do you have now? If you study these kits and look at the diagram in the above post, you just might be able to fabricate a kit for your valve.

https://www.surpluscenter.com/item.asp?UID=2009080406571720&item=9-7513&catname=hydraulic