kybundy
New member
on my tractor the bucket is stuck, in the curled down position and when i pull the lever to bring it back the bottom hoses (which are the ones in the middle of the ram) go super hard. how do i fix it.
john deere 1050
- Thread starter kybundy
- Start date
- Views: 1271
-
- Tags
- john deere 1050
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
If you have QD's, reconnect them.
If you have a hyd gage in the FEL IN port, and you see pressure but no cyl movement, then you know the QD is mis-connected.
If you have a hyd gage in the FEL IN port, and you see pressure but no cyl movement, then you know the QD is mis-connected.
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Sure the rams could be bad, but there are ways to check the seals.
A pressure gage should help you troubleshoot the hyd system.
A pressure gage should help you troubleshoot the hyd system.
