JD300 Rough Start and Stalls when moving or using hydraulics

   / JD300 Rough Start and Stalls when moving or using hydraulics #21  
Have you checked ignition timing with a timing light? Should be at TDC at idle and 28 degrees advanced at wide open throttle.
 
   / JD300 Rough Start and Stalls when moving or using hydraulics
  • Thread Starter
#22  
I'm not sure what that is, but I will look into it.
Have you checked ignition timing with a timing light? Should be at TDC at idle and 28 degrees advanced at wide open
 

Tractor & Equipment Auctions

New/Unused Fuel Pump with 50ft of Hose (A48837)
New/Unused Fuel...
2015 International ProStar Truck, VIN # 3HSDJAPR0FN618550 (A48836)
2015 International...
Kenco PH9000 Self-Leveling Pipe Hook - 9,000 LB Capacity, 8FT Max Pipe Length (A50397)
Kenco PH9000...
(1) 10ft Tarter Livestock Panel (A48837)
(1) 10ft Tarter...
2016 Isuzu NPR LCF (A50397)
2016 Isuzu NPR LCF...
LOAD OUT AND SHIPPING (A48836)
LOAD OUT AND...
 
Top