JD2640 Hi/Lo Range

/ JD2640 Hi/Lo Range #1  

LHughes

New member
Joined
Sep 21, 2009
Messages
3
I have a JD2640 that is stuck in low range. Has anyone else had this problem?
 
/ JD2640 Hi/Lo Range #2  
Do you mean the left shift lever between your legs? or the shift lever to the left of the steering wheel on the dash? If it is the left lever between your legs/ you will need to remove a snap ring securing the lever that is under the rubber boot. Pull the shift lever out and then reach down into the hole with a long screwdriver to align the 2 shift rails into neutral. Then reinstall the lever and all should work again. If it keeps getting jammed, then one or both of the internal shift rails may need to be replaced.
 
/ JD2640 Hi/Lo Range
  • Thread Starter
#3  
It is the lever between your legs. Thank you, for your help. I will try that tonight.
 

Marketplace Items

New/Unused 3 Point Receiver Hitch (A65583)
New/Unused 3 Point...
2006 GREAT DANE 48' T/A FLOAT TRAILER (A65643)
2006 GREAT DANE...
Skid Steer Post Auger (A65640)
Skid Steer Post...
2015 Isuzu NPR-HD Box Truck, VIN # 54DC4W1B3FS807576 (A65563)
2015 Isuzu NPR-HD...
Sitrex 2GL-T Hay Tetter (A65640)
Sitrex 2GL-T Hay...
SHAVER HD-8 HYD POST DRIVER (A64277)
SHAVER HD-8 HYD...
 
Top