JD2640 Hi/Lo Range

/ JD2640 Hi/Lo Range #1  

LHughes

New member
Joined
Sep 21, 2009
Messages
3
I have a JD2640 that is stuck in low range. Has anyone else had this problem?
 
/ JD2640 Hi/Lo Range #2  
Do you mean the left shift lever between your legs? or the shift lever to the left of the steering wheel on the dash? If it is the left lever between your legs/ you will need to remove a snap ring securing the lever that is under the rubber boot. Pull the shift lever out and then reach down into the hole with a long screwdriver to align the 2 shift rails into neutral. Then reinstall the lever and all should work again. If it keeps getting jammed, then one or both of the internal shift rails may need to be replaced.
 
/ JD2640 Hi/Lo Range
  • Thread Starter
#3  
It is the lever between your legs. Thank you, for your help. I will try that tonight.
 

Marketplace Items

John Deere 568 Mega Wide Plus (A60462)
John Deere 568...
IRMC High-End Massage Chair (A64047)
IRMC High-End...
2013 CATERPILLAR 305E CR EXCAVATOR (A64279)
2013 CATERPILLAR...
2019 CATERPILLAR 326FL EXCAVATOR (A60429)
2019 CATERPILLAR...
2025 SDLANCH IRGC40 Two-Seat Electric Tricycle (A64194)
2025 SDLANCH...
2019 FREIGHTLINER SPRINTER 2500 4X2 S/A CARGO VAN (A59912)
2019 FREIGHTLINER...
 
Top