ggrimm01
New member
Help.....Ok back late this summer my 3 pt starting giving me some problems. I could not get the 3 point to lift after my initial start up. When the tractor starts up, and I have the rock shaft level up in the 1 position....the rock shaft will lift up. After that the 3 point will only go down. I thought I had this problem cleared up. I tore apart the rock shaft control valve and cleaned all the valves and burnished each valve with a burnishing tool. In addition I replaced all the fluids throughout the whole tractor and the filters. I even replaced the internal metal hydraulic filter located down by the diesel tank sending unit.. Today... the problem came back. I cannot get the rock shaft to go up. It seems stuck. Is there anything I can do to correct this problem?
