JD 5105 fuel issue

[Birddog Dave]

so I had a primer diaphragm blow a hole. Finally got the correct primer assy. I installed it this morning. Tractor primed up and ran fine for 10 minutes. Cutting at WOT. Then it just shut down like I turned off ign switch. I can shoot fluid in the intake and it will run on that. Seems to be primed to the sediment filter. I replaced the can filter behind the valve cover prior to installing new primer and sediment filters. Fuel line is new.
Is there a fuel shut off fuse or the like? Any input is appreciated.

 

[ssgp2]

Couple of things come to mind 1.Fuel line obstruction where the line comes out of the bottom of the fuel tank. 2.Fuel shut off solenoid

 

[Birddog Dave]

I have 12v at all fuses except the Alt and fuel solenoid.

 

[Birddog Dave]

Is there a relay or any idea where this breakdown may be and getting voltage to that fuse?

 

[Birddog Dave]

Where are my grounds for the alt and fuel solenoid on the engine?

 

[Birddog Dave]

Found the relay, back up running.