JD 4110 FEL problem

[bell1]

Hello. I have a JD 4110 with a 410 FEL. The loader lifts fine and curls down fine. But it will only curl up about half-way and then stops. I haven't found any leaks/broken hoses. Any ideas? Could it be a cylinder?

It was working fine one day and the next day didn't curl up all the way.

 

[mmurphy]

There was a similar problem on here in the past few weeks. Ended up that quick disconnects needed to be unhooked and rehooked. Its cheap and always worth a try!

 

[bell1]

Just found that after I posted this. I will try that. Thanks.

 

[kennyd]

Welcome to TBN

As suggested, unplug and re-seat all the QD's...75% of the time that fixes the problem. Good luck.

BTW...You have a great machine there, not that I am biased or anything

 

[bell1]

It works! Must have disconnected one somehow. Thanks again everyone!

Kennyd - yes, it is a fantastic machine. I love it!