My 2003 JD 2210 with 151 hours was running fine and just stopped, then it would start but shut off within seconds. Now it turns over but does not start. I have done the following:
- Blew out of the fuel lines
- Fuel shutoff solenoid is working properly
- Fuel is flowing to the intake side of the fuel pump
- All fuses test good
- By passed the seat switch
- Fuel valve is open
- Installed new fuel filter
- Removed the fuel pump, arm has normal wear
I no longer hear the click when turning the ignition switch. What does that click represent? Also, I do not have fuel flowing from the fuel pump when in turning the engine over. Any suggestions are appreciated.
- Blew out of the fuel lines
- Fuel shutoff solenoid is working properly
- Fuel is flowing to the intake side of the fuel pump
- All fuses test good
- By passed the seat switch
- Fuel valve is open
- Installed new fuel filter
- Removed the fuel pump, arm has normal wear
I no longer hear the click when turning the ignition switch. What does that click represent? Also, I do not have fuel flowing from the fuel pump when in turning the engine over. Any suggestions are appreciated.