JD 1050 wiring diagram

[tree grower]

My IT shop manual does not have a wiring diagram, and a Google search returns TMI, and what might be pertinent is not readable. Does anyone know where I can get a correct, legible 1050 wiring diagram on-line? My starter has a dead spot, and the rebuild shop has asked if there is a relay ahead of the starter. I would hope a wiring diagram would answer that question. Thanks in advance

 

[beenthere]

tree grower
I do not have the 1050 wiring diagram, but only the 1070. There is a schematic that is identified as the "old version" which leads me to think maybe it is a carryover from the 1050 and may be of some help.
I'll attach it for what it may be worth to you...

 

[Rock knocker]

No relay, although it is not uncommon for people to add a relay to the solenoid so that it can receive voltage straight from the battery without any loss thru the key switch. Hope this helps, PM if you need a more legible copy

 

[tree grower]

Thanks, guys. The 1070 schematic has some differences from my 1050--probably a combination of mine being an early model plus fundamental changes from the 50 series to the 70. Knowing that there is not a relay is a big help--I won't search for what isn't there.

 

[Rock knocker]

The diagram I attached is a 1050 all models diagram.

 

[tree grower]

10-4, Rock knocker. The image was hard to read until I accidentally enlarged it, and that is exactly what i was looking for. Thanks for all the help.