marcelPL
Silver Member
Hi all, my tx1300F will not start anymore.
First i found that the ground cable and starter engine became extremely HOT after trying to start with help of starter cables (on my iseki tx1500).
Even the starter cables became too hot to touch.
After this i replaced both the battery, the starter engine (revised), and the ground cable from the battery. I also tried to clean all cables to look for bad contact.
After connecting everything (with new starter engine), at least i could start it, but it stopped after about 20 seconds.
After this i have nothing, not even the ''click'' when i try to start it.
Must be an electrical problem, does anybody know if one can still buy the cable-tree (or whatever it is called) for these old iseki's?
many thanks,
M.
First i found that the ground cable and starter engine became extremely HOT after trying to start with help of starter cables (on my iseki tx1500).
Even the starter cables became too hot to touch.
After this i replaced both the battery, the starter engine (revised), and the ground cable from the battery. I also tried to clean all cables to look for bad contact.
After connecting everything (with new starter engine), at least i could start it, but it stopped after about 20 seconds.
After this i have nothing, not even the ''click'' when i try to start it.
Must be an electrical problem, does anybody know if one can still buy the cable-tree (or whatever it is called) for these old iseki's?
many thanks,
M.