Is white pvc mipt used for dwv fittings fine, coarse or 2.44 fine?

[homedad]

I purchased a food grade IBC tote for water at my property and need a fitting to screw onto the valve. Amazon wants to know the thread type. The IBC is 3 hours away but when last there I unscrewed the cap and went to TSC to try and create a fitting. The cap screws fine onto a male threaded 2" white PVC adapter used for drain, waste and vents. Does anyone know if its fine, coarse or 2.44 fine?

 

[gstrom99]

There's a few. The two most common are S60x6 (coarse, metric but close to 2" without the camlock), and 2" camlock, fine thread.

How To Identify All IBC Threads - RainHarvest Products and Services

This article deals with helping you to study and determine the THREAD ID information for various products. Take a look at the photos below that have ID descriptions on & with them. IBC = Intermediate Bulk Container, also referred to as; Pontoon, Palleton, Pod or, TOTE. U.N Std Dimensions: 1200mm...

rainharvestproducts.nz

Help with IBC Tote Threads and Valves

Connecting hoses, caps, and other accessories to an IBC tote can be confusing because there are so many different thread types utilized on the bladder itself as well as on the valves. A detailed description of most common thread types and valve types is available by downloading the PDF in this...

www.greatlakesbiosystems.com

I saw a great uTube video about a guy that used a 2" rubber connector to attach the PVC bung and garden hose valve. I've used that.

 

[homedad]

Thanks.

 

[homedad]

I ended up purchasing all 3 and lo and behold…non of them fit. I went to HD and in 30 minutes made one that works fine out of White PVC DWV and a short galvanized nipple. I regularly think Amazon just makes errors easier.