Info on this transaxle .

[ncredleg]

Can this transaxle be mounted in the position shown? I am planning on utility hauler and need something that can be installed this way?




https://www.surpluscenter.com/item.asp?UID=3176020808502127&item=13-1088&catname=powerTrans

 

[oldnslo]

Can this transaxle be mounted in the position shown? I am planning on utility hauler and need something that can be installed this way?




https://www.surpluscenter.com/item.asp?UID=3176020808502127&item=13-1088&catname=powerTrans

What do you mean by the position shown. If as shown in the picture on surplus center the answer is yes.

Roy

 

[pat32rf]

What will you be using for motive power?

 

[MMagis]

Unless that transaxle is a different design than the many I’ve worked with, that is not the proper orientation. The shaft should be pointed up. That’s where the fan would mount, or a pulley

 

[jimgerken]

Looks right to me. The 2000 series (according to my expert who owned one) had horizontal shaft engines.

 

[MMagis]

I should have added the disclaimer that it’s very possible I’m wrong. Looking closer, you’re right. The placement of the brake lever shows that it can’t rotate 90 degrees like I thought.

 

[J_J]

Can this transaxle be mounted in the position shown? I am planning on utility hauler and need something that can be installed this way?




https://www.surpluscenter.com/item.asp?UID=3176020808502127&item=13-1088&catname=powerTrans

It appears to mount as shown. The filler plug on the back should be in the up position. There are two bolt on one side to bolt to frame.

 

[ncredleg]

Soory about the delay , but thanks everyone.:thumbsup:
I ordered it ,but it hasn`t arrived yet.I am a little embarrassed about my concept since all of ya`lls are so nice.I will post pics when I get it a little more together.

 

[ncredleg]

What do you mean by the position shown. If as shown in the picture on surplus center the answer is yes.

Roy

Hi Roy. Yes, with it upright like that.I want to mount the motor above the transaxle to save on space.THanks again.