Importing and modifying a new mini excavator from China

[dfkrug]

A 2017 Sany 1.6T "only" garnered a top bid of 11K last week at a local auction (Sacramento, CA). And it had a non-functional hour meter. No telling if the final bid was accepted by the seller.

I don't get how folks can buy auctioned equipment without in-person inspection. At least Alibaba offers to inspect a machine in China for a nominal fee.

I am glad I gave up the pursuit of a beater name-brand mini-X in order to buy my XN08.

 

[D'oh]

It's official, My Mini Geisha, went on a (barge) Cruise last night. It's at the Cabin now.

 

[Sawyer Rob]

Hmmm. I called their headquarters in GA and they told me it didn't matter who bought it from where as long as it was in the time limits it was warranted.

Kind of moot point now. That auction was my last attempt at getting an excavator at auction. I had a deal set up with China and just wired the downpayment for one.

I know someone who bought one at an auction, it needed warr. and all warr. work was denied because it came from an auction. Prior to him getting it, he was told same as you were.

Sany will NOT warr. auction machines.

SR

 

[Fredrik]

Hey Everyone, New guy to TBN. Just bought an AGROTK KAT12 from RB AUCTIONS. I'm wondering if any one has a picture of what hoses to swap to TLB controls. Same valve block as most of the other CE mini's out there. Just trying to save some time . Thanks in advance.

 

[dfkrug]

Just bought an AGROTK KAT12 from RB AUCTIONS.

Congrats on the purchase. What did you pay (incl all fees/taxes), and where are you and the auction located?

 

[TimberFarm]

Hey Everyone, New guy to TBN. Just bought an AGROTK KAT12 from RB AUCTIONS. I'm wondering if any one has a picture of what hoses to swap to TLB controls. Same valve block as most of the other CE mini's out there. Just trying to save some time . Thanks in advance.

Got any photos?

 

[Fredrik]

Don't have any pics yet but when I do i will post them ,or rather my wife will......
I paid $6,138 all told. Auction was in MD. , almost in DE.
I'm in the piedmont of Va.

 

[Fredrik]

My bid was $5,250 , so almost another grand for all the other BS.

 

[dfkrug]

Don't have any pics yet but when I do i will post them ,or rather my wife will......
I paid $6,138 all told. Auction was in MD. , almost in DE.
I'm in the piedmont of Va.

That's a fantastic price, total. The seller lost money. Dunno if you said: did you just get just the one bucket, or did you get any other attachments/spares?

Update your profile with VA. Lots of TBN users in Virginia. Welcome.

 

[Fredrik]

Just one bucket so far . I have a complete home style machine shop so will likely make a lot of my own stuff. That being said most attachments are so cheap it may not be worth my time. Steel is expensive and I'm not getting any younger.......

 

[TimberFarm]

My bid was $5,250 , so almost another grand for all the other BS.

That was why I had to set myself a firm limit on machines I was bidding on in the auctions. (bigger ones).
The auctions charging as much as 10% buyers premium, then another 4% for being an internet bidder, then state sales tax, then if the machine was far away, having to ship it. By then, it's priced right out the market.

I have seen so many of these, did you get one that was still shrink wrapped?

 

[dfkrug]

I have seen so many of these, did you get one that was still shrink wrapped?

My first was crated and shipped LCL. The other 2 I got and sold were from a 20' container of 6 units, which you just drove out of the container. Some sellers are shipping them stacked in a full container, so I think they can pack 12 units into a 20. But you have to be able to unstack them from the container, which requires a hefty fork lift and a good loading dock. And a bit of assembly.

 

[ArlyA]

Do wish I had one!

 

[Fredrik]

I had set my limit at $5,000 but had been in a bidding war with a guy who was buying them all.Turned out his limit was $5,000 and bidding increments were $250. You'r right Timber you need to figure on about a grand per 5 grand. Don't forget auctions will charge 2.9% if you put it on a card.
ArlyA just do it...... You can plow you'r driveway one 17" bucket at a time. Life is to short not to own lots of machines.

 

[Fredrik]

Sorry Timber, yes it was shrink / film wrapped.

 

[TimberFarm]

My first was crated and shipped LCL. The other 2 I got and sold were from a 20' container of 6 units, which you just drove out of the container. Some sellers are shipping them stacked in a full container, so I think they can pack 12 units into a 20. But you have to be able to unstack them from the container, which requires a hefty fork lift and a good loading dock. And a bit of assembly.

I put my order in and they told me it would be coming in a 20ft by itself. I am getting 3.5ton zero tail model with quick attach, hyd. thumb, 24" bucket, rake, and 1000mm cleaning bucket.
He was telling me that 20ft HC containers are nearly impossible to get and if you can get one it is a $$premium and added wait time. 40HC are no problem. They will be shipping the cab unattached so it will fit in a regular 20 ft. He sent me a video showing how the cab attaches and un attaches. I should be able to make up a sling and lift it in place with my tractor forks. They are also going to send me walk around video when it is done and it would be a continuous video with no breaks so I could see that the machine they are showing me is the machine I get with my VIN plate and also show it being test run.

 

[Fredrik]

So heres what I haven't told you. I pulled a trailer for almost six hours last Friday to pick up my mini from RB Auctions. I started it and proceeded to move it when fluid shot out of the right hub motor lines. The restrictors going in to the 50MM bosses on top of the motor had been sheered off. They offered to fork it on my trailer but of course i refused. "No worky - No takey" I said. They agreed to fixing it (For free). I also told them I expected to be comped for time and mileage . They said we could work something out...( sounds a little off the mark since they wouldn't work a deal right then ). What is the groups opinion on how to proceed with this minor hassle ?
Timber, way to go man. I wish the 1tons had zero swing. It wouldn't be hard to do. make the footprint wider. 48" would probably do it.

 

[TimberFarm]

Might as well let them fix it as long their "fix" isn't some jury rigged set up. Since it is Ritchie Bros., I'm sure they have dozens of these scattered around the country that they can cannibalize a couple hydraulic lines for you.
Or, just go on EquipmentFacts and see where all the other auctions are that have the same model.

RB has a huge yard about a half hr. away from me in Butner, NC right along I 85.

 

[Fredrik]

Have you ever dealt with them? Seem like a giant company, just hope they'r to big to not give a **** about us small fish.
I was told they would have to check with some vendors to find the parts. Would be a lot less trouble to cannibalize.

 

[TimberFarm]

I never dealt with them. I always got outbid.