implement arm won't lower

/ implement arm won't lower #1  

iammike

New member
Joined
Feb 6, 2011
Messages
4
B7100 hst implement arm raises but doesnt lower. I suspect the control valve.has any one else run into this?
 
/ implement arm won't lower #2  
Have you checked your Rate of Drop (ROD) knob to make sure it's not all the way closed? This knob controls the speed that the arms lower at and can stop them from lowering if completely closed.
 
/ implement arm won't lower
  • Thread Starter
#3  
Yes, I even backed it off counter clock wise to be sure. It was working and then Quit as I was finishing up my drive. It was also making noise when I lifted the blade.
 
/ implement arm won't lower #4  
Yes, I even backed it off counter clock wise to be sure. It was working and then Quit as I was finishing up my drive. It was also making noise when I lifted the blade.

I saw that you also posted in the Hydraulics forum. That's probably a better area for this, so I'll watch how this comes out in that thread.
 
/ implement arm won't lower #5  
Normally found under the seat, in the middle...
 

Marketplace Items

Landhonor Quick Attach Rock Bucket (A66285)
Landhonor Quick...
Pemberton Inc 416469 Hydraulic Dual Cylinder Grapple Bucket (A64194)
Pemberton Inc...
2016 John Deere 470G Hydraulic Excavator (A64194)
2016 John Deere...
Hedge Posts (A65640)
Hedge Posts (A65640)
2004 International 4300 ASM Altec AM855 55ft. Bucket Truck (A64194)
2004 International...
2018 INTERNATIONAL LT DAY CAB TRUCK TRACTOR (A67147)
2018 INTERNATIONAL...
 
Top