IH 784-which gear?

/ IH 784-which gear? #1  

Rang

New member
Joined
Jul 3, 2014
Messages
4
Location
Terrell, TX
Tractor
IH784
Can someone give me some guidance as to what gear I need to be using when I mow, disk, etc. My husband always did these things, but he has passed away and I do not have a clue which gear I should be using. Can anyone enlighten me?
Thanks so much.
 
/ IH 784-which gear? #2  
Not knowing what the ground speed is for each gear for your tractor, it is hard to give you a quantifiable answer. I have several geared tractors and do the majority of my mowing and pulling in 1st gear. When I am moving from one area to another, then I shift into higher gears. I am also a bit more cautious (hesitant) than most people so I generally move a bit slower.

Sorry for your loss.
 
/ IH 784-which gear? #3  
Underground.........fastwalkingspeed............ontop........a bit faster.........ALWAYS A SPEED YOUR ATEEZE WITH !
 
/ IH 784-which gear? #4  
My suggestion is to find someone local that can spend a day with you guiding and going over the tractor including maintenance and driving. It may cost you $100 dollars or so but if it will keep you from burning the tractor up and running it safely you will be light years ahead. Just my $.02
 
/ IH 784-which gear?
  • Thread Starter
#5  
Thanks for the advice guys, I'll see what I can find.
 
/ IH 784-which gear? #6  
Low range third or forth is good for most chores.
 
/ IH 784-which gear? #8  
I've got a 784, and I've always used low 3rd or 4th for slower work, and 1 high for disking. Dont forget you have the T/A on the dash to give you kind of an in between speed on ranges.
 

Marketplace Items

2024 AGT INDUSTRIAL  H13R (A60736)
2024 AGT...
2007 Ford F-350 9ft. Stakebody Flatbed Truck (A55852)
2007 Ford F-350...
2013 HERCULES ALUMINUM KILL TRAILER (A60736)
2013 HERCULES...
HYDRAULIC THUMB FOR MINI EXCAVATOR (A58214)
HYDRAULIC THUMB...
2012 UNVERFERTH 13-INCH REAR SPACERS FOR 10 BOLT HUB (A55315)
2012 UNVERFERTH...
2016 F-250 4X4 (A56438)
2016 F-250 4X4...
 
Top