IH 784-which gear?

/ IH 784-which gear? #1  

Rang

New member
Joined
Jul 3, 2014
Messages
4
Location
Terrell, TX
Tractor
IH784
Can someone give me some guidance as to what gear I need to be using when I mow, disk, etc. My husband always did these things, but he has passed away and I do not have a clue which gear I should be using. Can anyone enlighten me?
Thanks so much.
 
/ IH 784-which gear? #2  
Not knowing what the ground speed is for each gear for your tractor, it is hard to give you a quantifiable answer. I have several geared tractors and do the majority of my mowing and pulling in 1st gear. When I am moving from one area to another, then I shift into higher gears. I am also a bit more cautious (hesitant) than most people so I generally move a bit slower.

Sorry for your loss.
 
/ IH 784-which gear? #3  
Underground.........fastwalkingspeed............ontop........a bit faster.........ALWAYS A SPEED YOUR ATEEZE WITH !
 
/ IH 784-which gear? #4  
My suggestion is to find someone local that can spend a day with you guiding and going over the tractor including maintenance and driving. It may cost you $100 dollars or so but if it will keep you from burning the tractor up and running it safely you will be light years ahead. Just my $.02
 
/ IH 784-which gear?
  • Thread Starter
#5  
Thanks for the advice guys, I'll see what I can find.
 
/ IH 784-which gear? #6  
Low range third or forth is good for most chores.
 
/ IH 784-which gear? #8  
I've got a 784, and I've always used low 3rd or 4th for slower work, and 1 high for disking. Dont forget you have the T/A on the dash to give you kind of an in between speed on ranges.
 

Marketplace Items

BETTER BUILT FUEL CELL (A58214)
BETTER BUILT FUEL...
2019 DITCH WITCH FX25 PORTABLE VACUUM TRAILER (A59823)
2019 DITCH WITCH...
2019 Sellick S80 (A60462)
2019 Sellick S80...
2019 Ford F150 XL (A57148)
2019 Ford F150 XL...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
JMR STUMP/ TRENCHING BUCKET (A56857)
JMR STUMP/...
 
Top