I have a Predator 425 backhoe. The hydraulic drive just quit and I found that the gerotor inside the hydraulic pump had broken. I cannot identify the pump company to attempt to order parts. The backhoe was made by Superstav in the Czech republic in 1997. The pump appears to be supplied by a company out of Italy. I wonder if another tag is missing with the company name on it. Anyone recognize the tag? Or is there a shop in the U.S. that can remake the gerotor. (I have enough pieces to get the dimensions) the tag says Axial Pump APVC-250. I can't figure out how to attach a photo.
Identify hydraulic pump
- Thread starter earl6969
- Start date
- Views: 2286
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 66,668
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Scoda?
oldnslo
Super Member
Is this pump a hydrostatic drive for the travel function? If yes it sounds like the charge pump is what failed. Italian could be Brevini.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 66,668
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Our PowerTracs us some pumps made by the Italian company Bodioli & Pavesi.
Mission | Bondioli & Pavesi
But they have no numbers that match what the OP gave.
Scoda does.
Mission | Bondioli & Pavesi
But they have no numbers that match what the OP gave.
Scoda does.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 66,668
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
So the charge pump is the gerotor positive displacement pump inside the variable volume pump, correct?
oldnslo
Super Member
Yes that is correct.
ptsg
Super Member
oldnslo
Super Member
Scoda looks like like renamed Atos pumps.
Earl
Was there a piston pump with the geroter as second pump for another function like steering? Reason for asking is that the Scoda- Atos do not show a geroter pump option
Earl
Was there a piston pump with the geroter as second pump for another function like steering? Reason for asking is that the Scoda- Atos do not show a geroter pump option
I’m curious of the same. A gerotor pump typically is lower pressure.
They are however used for “charge pumps” for piston type hydrostatic pump normally used for propel
Would be a really odd setup if it was used as an open circuit system like a backhoe to run differential area cylinders.
