I think I am going to get bit!

   / I think I am going to get bit! #1  

BryanM

Gold Member
Joined
Dec 18, 2006
Messages
278
Location
Northwest Ohio
Tractor
John deere 2155, ford 1600
I think I am going to get bite!

Well had a window of 4 days to hay and tried to get it done baled a few bales and tested moisture with a farmex moisture tester. It looked good except had pockets in the bale where it was a bit wet. These pockets where reading around 20 to 26% moisture. So I broke the bales open and spread them out. And of course the weather has rain in the forcast.

Should I leave the hay in rows or spread out? It feels almost dry except for a few spots low in the rows?
 
Last edited:
   / I think I am going to get bit! #2  
Re: I think I am going to get bite!

Well had a window of 4 days to hay and tried to get it done baled a few bales and tested moisture with a farmex moisture tester. It looked good except had pockets in the bale where it was a bit wet. These pockets where reading around 20 to 26% moisture. So I broke the bales open and spread them out. And of course the weather has rain in the forcast.

Should I leave the hay in rows or spread out? It feels almost dry except for a few spots low in the rows?

What are you using for a rake? If it is a roll bar rake I would spread them out. If it is a rotary I would leave them. The rotary make a row that will allow better air flow, where a roll bar ropes the hay in a tighter row.

With 4 days, what is your mower, does it have a conditioner?

Did you get your tedder issue resolved?
 

Tractor & Equipment Auctions

2009 Wilson Hopper Bottom (A59814)
2009 Wilson Hopper...
UNUSED PAIR OF MINI RUBBER TRACKS (A52706)
UNUSED PAIR OF...
9000 (A47477)
9000 (A47477)
Truck Mounted Carpet Cleaning Extraction Machine (A57454)
Truck Mounted...
Honda UTV (A56859)
Honda UTV (A56859)
SHOP BUILT TOOL TRAILER (A58214)
SHOP BUILT TOOL...
 
Top