Hydralic Roto-Tiller

[wriken]

I have access to a 50" case Roto-Tiller and it is run by hydralic oil, can I adapt this to my L3000 w/ldr. If so can anybody tell me how to go about running the lines, and where to tap into the existing lines. The tiller has a control valve for it already. Thanks.

 

[Anonymous Poster]

wriken,
If you have a few hours to spare go to the hydraulic tip and tilt posts. Lots of good info there. If you still have questions, come on back.

 

[wriken]

Thanks for the info, I'll do that, Thanks again