big early
New member
I have a 2013 S650 bobcat. Problem is when using the foot controls the hyd are slow how do i adjust this, we have skidsteers at work and the speed of the hyds is way faster then mine any ideas? Thanks
Hyd adjustments
- Thread starter big early
- Start date
- Views: 2791
mddorange
Elite Member
- Joined
- Jul 16, 2014
- Messages
- 3,357
- Location
- Guin, AL
- Tractor
- 2014 Kubota L3200 DT w/LA524 FEL, Loaded rear tires, LP RCR 1860 5' Cutter, LP RTA 1258 5' Tiller, LP PFL 2042 Pallet Forks w/60" Extensions, KK BB60 Box Blade, KK PHD-12" Post Hole Digger
:welcome:
To the TBN forum Early. We are glad that you joined.
I can't help but someone will be along shortly that will.
To the TBN forum Early. We are glad that you joined.
I can't help but someone will be along shortly that will.
TBN Support
TBN Support
- Joined
- Feb 4, 2015
- Messages
- 4,560
:welcome: Welcome to the forum!
I'm going to move this thread over to our Bobcat section to see if we can get you some answers.
I'm going to move this thread over to our Bobcat section to see if we can get you some answers.
Jabonee
Platinum Member
If your SSL is ACS or SJC try calibrating the actuators . :thumbsup:
SSdoxie
Elite Member
Other possible causes.
Pedals not moving to full stroke - check/clean debris out of foot pedal area.
Gear pump not spinning fast enough due to;
belt slippage - adjust or replace belt.
engine not at full RPM - If Kubota engine, throttle adjustment or stretched cable
If Doosan/Bobcat engine faulty throttle position switch.
Pedals not moving to full stroke - check/clean debris out of foot pedal area.
Gear pump not spinning fast enough due to;
belt slippage - adjust or replace belt.
engine not at full RPM - If Kubota engine, throttle adjustment or stretched cable
If Doosan/Bobcat engine faulty throttle position switch.
