Hour Meter Issue

[Tim_in_IA]

Hi my hour meter stopped working but the tach still works on my 6500. Quick thoughts on what this might be?

 

[Navasot]

Hi my hour meter stopped working but the tach still works on my 6500. Quick thoughts on what this might be?

Is it the old mechanical meter or digital? Give it a tap and see what happens. You may also take the screws out of the dash pull it out and unplug the harnesses then re attach incase something is dirty.

 

[George2615]

The mechanical style may be cable driven and could have broken. If it's electrical check the wiring for a broken wire from the source (probably off the ign key switch) or the ground wire.

 

[OldGinTractors]

That is a pretty common problem with the older 00 series. I think the board in the panel breaks down. You can replace the instrument panel or just add a after market hour meter to keep up with service intervals.

 

[Tim_in_IA]

Thank you I will check the cable out. Hopefully not the board. I assumed that the hour meter ran of the tach cable but it must have a different connection.

 

[Navasot]

Thank you I will check the cable out. Hopefully not the board. I assumed that the hour meter ran of the tach cable but it must have a different connection.

Tack will operate from the alternator. Are any other functions not working?

 

[Tim_in_IA]

Not really, hour meter is it. Hopefully it's that cable as the board sounds like something more expensive or not available.

 

[Maine_Polack]

Hi Tim....I also lost the hour meter a couple of years ago. Took off the
instrument panel and saw nothing obviously wrong. I then hooked up
a diff. meter.

 

[Tim_in_IA]

Hi Tim....I also lost the hour meter a couple of years ago. Took off the
instrument panel and saw nothing obviously wrong. I then hooked up
a diff. meter.

Hi! Thanks for letting me know this. I plan on removing the instrument cluster to day to see what kind of cluster I am in. Also replacing my seat as mine is badly cracked. Not sure what to replace with but it has to go.

 

[Maine_Polack]

My seat is fine. The reason being, that it is covered by a small tarp when not in use.
I'm short on one end, so I sit on an old wheelchair foam seat. Hense the cover.