help guages out

   / help guages out #1  

mac12

New member
Joined
Sep 27, 2002
Messages
1
i've been using my dads kubota 2350, and this past weekend the fuel guage, and temp guage went out. also the ignition key no longer turns it off, you have to pull the kill switch now. I noticed this after driving over a piece of barbed wire. any ideas what it did. i looked underneath and i don't see anything other than the tail light not being plugged in, only the emergency flashers, but i don't see where the taillight wire would plug into. also i noticed some paint missing on the frame, where would be a good place to get some orange paint. thanks in advance.
 
   / help guages out #2  
Sounds like a fuse blew or a connection came loose. You can get Kubota orange spray paint at any dealer - you probably want Bright Orange II.
 
   / help guages out #3  
You may also want to trace all the wiring slowly to check for a break in the insulation,which could be causing a dead short.
 
   / help guages out #4  
I wouldn't try to cover it up and NOT tell your dad ;) Sounds like a fuse to me ...
 

Tractor & Equipment Auctions

2021 GMC Sierra Pickup Truck, VIN # 1GTP9EEL4MZ178676 (A57453)
2021 GMC Sierra...
BIN PARTS, SWEEP AUGER & ELECTRIC MOTOR (A52708)
BIN PARTS, SWEEP...
2015 Ford E-350 Cutaway Box Truck (A55973)
2015 Ford E-350...
2019 Ford Transit Connect Cargo Van (A56858)
2019 Ford Transit...
PALLET OF MISC (A58374)
PALLET OF MISC...
2013 Ford F-250 Super Duty Service Truck, VIN: 1FT7X2BT7DEB91437, Extended Cab, 4x4, 6.7 L Power (A59076)
2013 Ford F-250...
 
Top