tractorthatcan
New member
Hello and Thank all of you for sharing your wealth of information. As a first tractor owner I have used this information as a HOW TO and in some case a Sanity Check. Over the last year and a half there is nothing that I could not do with my BX25 therefore, my tractor nickname "The Little Tractor That Can" Again Thank You!!
As I wonder further into the weeds I do have a question. I have noticed that the right outlander has some play in it (front to back along the bottom pins(frame and cylinder) but no up and down play. My guess is around 3/16 inch. Left outlander solid as a rock. As the right side is greased it becomes rock solid which I do each time before I use it. Looked at parts diagram and could not see any shims just the pins. Could they be worn both??
Any suggestions?
As I wonder further into the weeds I do have a question. I have noticed that the right outlander has some play in it (front to back along the bottom pins(frame and cylinder) but no up and down play. My guess is around 3/16 inch. Left outlander solid as a rock. As the right side is greased it becomes rock solid which I do each time before I use it. Looked at parts diagram and could not see any shims just the pins. Could they be worn both??
Any suggestions?