3-Point Hitch gt14 3 point hitch

[gt14]

I have a Yanmar GT14. I am looking for a 3 Point hitch for my tractor that can use the hydraulic lift of my mower deck. I have a friend that can fabricate one if I can find a picture or schematic of one. So far I have been unsuccessful. Does anyone have a pic or schematic?

Thank you in advance
Dan Britton

 

[86turbodsl]

I have a GT14 as well, and I've heard the 3pt is no longer available, but you might check with Len or Gary and see if they can still get one. I would just fab one if you can't find one. Gary has blowups of the parts I'm sure, or I could send you a pdf if you don't have one. The stuff is all shown in the shop manual.

 

[gt14]

That would be great to get a PDF file of the exploded 3 pt. Also if not to much trouble I am looking for the rear PTO option if you have it in your manual.
Thank you Dan
mcr@meritel.net /forums/images/graemlins/smile.gif

 

[gt14]

Where can I get a shop manual that will show the 3 point set up? Is there a web site?

Thanks

 

[86turbodsl]

Sorry, My PDF ability, and scanning ability went out the window with a job loss a couple weeks ago. I don't currently have any way to send you anything.
Sorry. You can wait a few more weeks until I get a new job, or you can order the Parts manual for the GT14. I think it's in there. There's also a good amount of photos of the setup in the service manual, but I'm not sure if there's a blowup picture of every part.

 

[86turbodsl]

Ok, I have photos for you, here's no 1

 

[86turbodsl]

no 2

 

[86turbodsl]

no 3

 

[86turbodsl]

no 4 - final.

 

[dbritton]

Thank You for pictures they are very helpful. If I could ask another question. What is the length of part (G) Pushing Bar and what is the length of the (D) Lower Links.
Thank You

 

[86turbodsl]

Thats a very good question. I have no idea. I don't own a 3pt on my GT14. I don't believe that Cat0 hitches are standardized either. Sorry.