Grease trailer sleeve coupler

   / Grease trailer sleeve coupler #1  

azuerch

New member
Joined
Jan 4, 2019
Messages
24
Tractor
2021 Kioti NX4510
Hello I have a PJ 12ft utility trailer that has a slide style sleeve coupler. It has become increasing difficult to lock/unlock the coupler and I'm not sure how to grease or oil it. The style is like this:

1755196934091.png


It only slides maybe and inch or so (by design) and there's no want to disassemble it that I can tell to clean and grease it up good. I can spray something like WD40 under the sleeve but I'd like to use something that will stick and last longer but there isn't much of an gap to spray into and it neesd to penetrate fairly deeply. Any recommendations?
 
   / Grease trailer sleeve coupler #3  
WD40 is not a lube. I'd ask/call PJ themselves.
 
   / Grease trailer sleeve coupler #4  
You could try a motorcycle chain lubricant. There's also lithium grease in a spray can.
 
   / Grease trailer sleeve coupler #8  
I use graphite spray on my hitch shank and white grease on the ball. While graphite in spray form will rub off, some does remain. I don't know if it would work it's way inside of the slide on your "bulldog" coupler or not?
 
   / Grease trailer sleeve coupler #9  
It is most likely a build up of grit and garbage. Brake clean or WD while exercising it, then a powdered graphite to lube it. And grease or oil is going to attract dirt and dust and gum the works up.
 
   / Grease trailer sleeve coupler #10  

Tractor & Equipment Auctions

2001 Club Car Carryall Utility Cart (A51691)
2001 Club Car...
CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2006 TerraGator 8104 (A53472)
2006 TerraGator...
New/Unused AGT YSRT14 Mini Skid Steer Loader (A51573)
New/Unused AGT...
New Land Honor Heavy Duty Plate Compactor (A53002)
New Land Honor...
 
Top