Loader Grapple bucket?

[morthog1957]

I have an 09 4320 with a 400X loader. I want to put a grapple bucket on the loader to help clean up some wooded areas around the house. I have looked at "The Thumb" online, is this the best solution? Or does Deere make a grapple bucket that I could just "change" out? Which is the best? Give me some advice......

 

[kennyd]

I have an 09 4320 with a 400X loader. I want to put a grapple bucket on the loader to help clean up some wooded areas around the house. I have looked at "The Thumb" online, is this the best solution? Or does Deere make a grapple bucket that I could just "change" out? Which is the best? Give me some advice......

In my opinion, the "best" is a dedicated grapple, not a add-on "thumb"

Before I type for an hour, do a forum search on these terms for HOURS of reading.

markham
wr long
grapple
4n1

I have the Markham LD-48, cost was right at $1k delivered...it's a great deal.

 

[kennyd]

A few more pictures:

 

[deere4320]

Hi,
I have a 2007 4320 and i love it:thumbsup::thumbsup:

Anyway.... Everything Attachments sells a pretty good one and free shipping...

Construction Attachments X-Treme Duty Compact Tractor Root Grapple Universal Skid Steer Quick Attach CAL, 1RGCMP

The Frontier (john deere) AD11:

John Deere Ag - New Equipment Features for AD11 Series Debris Grapples

or the AD12:

John Deere Ag - New Equipment Features for AD12 Series Debris Grapples

There are also some good deals on ebay. Good Luck!

 

[morthog1957]

What about hydrolic hookups? Do I have what it takes for the Markham? I AM not a mechanic...so you gonna have guide me here. I have the 4 that attach to the FEL and then I have a remote in the back....

 

[deere4320]

you have to have 2 auxiliary hydraulic valves on the FEL

 

[morthog1957]

What ya reckon Deere is gonna charge to install those?

 

[deere4320]

i am not sure....most likely around $600

 

[morthog1957]

thanks for your help....gonna get me one Monday....

 

[deere4320]

nice!!! Post some pictures one u do!!!!!

 

[RollTideRam]

You need the 3rd scv installed and the hardline kit that runs to the end of the loader arms.

 

[John Henry]

this is what I have to operate the grapple

 

[morthog1957]

How hard will Deere "hit me" for this?

 

[John Henry]

Frontier grapple bucket around $2300,diverter valve - $350,less if you get at surplus center,control handle for loader - $70,hydraulic lines from john deere - around $250-300 for kit

 

[kennyd]

you have to have 2 auxiliary hydraulic valves on the FEL

Wrong answer You only need 1 valve for the grapple. The OP stated hes has a rear remote already, that will operate the grapple perfectly.

There is a kit from JD to extend the rear remote coupler up to the mid section where the FEL couplers are, and then up the loader boom. It's a complete bolt on kit and very easy to install.

 

[kennyd]

this is what I have to operate the grapple

Frontier grapple bucket around $2300,diverter valve - $350,less if you get at surplus center,control handle for loader - $70,hydraulic lines from john deere - around $250-300 for kit

Welcome to TBN

That is WAY overkill for what the OP needs, however it is a very nice setup.

 

[kennyd]

You need the 3rd scv installed and the hardline kit that runs to the end of the loader arms.

Exactly. And he already has the 3rd SCV.

 

[John Henry]

yes,I know you could use the rear remotes.I also have that kit but for me,it's easier to use the control knob on loader handle.

 

[kennyd]

yes,I know you could use the rear remotes.I also have that kit but for me,it's easier to use the control knob on loader handle.

Where did you get that handle for $70? I paid $175.00 for mine!

 

[John Henry]

The knob was from a takeuchi mini excavator which I modified to fit the tractor