Gooseneck or bumper pull?

   / Gooseneck or bumper pull? #81  
Bumper pulls if not set up properly can get you into a wreck. a goose neck is the safest way to tow heavy. I think a bumper pull is easier to back but you can learn to back a goose neck also.
 
   / Gooseneck or bumper pull? #82  
I would go hands down with a gooseneck above a bumper pull. I have 3 ranging from 14' to 30'. They are much more forgiving when pulling and a lot more stable and easier to get into tight places.
 
   / Gooseneck or bumper pull? #83  
I would go hands down with a gooseneck above a bumper pull. I have 3 ranging from 14' to 30'. They are much more forgiving when pulling and a lot more stable and easier to get into tight places.
Agree to disagree
 
   / Gooseneck or bumper pull? #84  
I would go hands down with a gooseneck above a bumper pull. I have 3 ranging from 14' to 30'. They are much more forgiving when pulling and a lot more stable and easier to get into tight places.
You had me on the first 2, but tighter spaces? I think the BP is a little better there.
But I wouldn’t turn down a GN for maneuverability. The advantages of the GN mostly outweigh the BP.
 
   / Gooseneck or bumper pull? #85  
My general rule of thumb is that a gooseneck should be heavy enough to require a dually to pull it, or you're probably better off with a bumper pull anyway. Gooseneck trailers are more expensive than a bumper pull, since obviously they have a lot more steel in them, which also makes them heavier. Some guys make use of the "neck" portion of the goose, building a small deck up top which can provide more load area. Of course, this would increase pin weight and that needs to be taken into account. A gooseneck trailer is easier on the pulling vehicle's chassis, since there is a little less lever action. Lots of guys run single wheel tandem goosenecks with a 16k GVWR behind a 3/4 ton 10k pickup, making them under CDL by a hair. I like the idea of a trailer for your bagged wood with a tractor on the back for loading and unloading. As you mentioned, the trailer has other value such as moving the tractor for other purposes, or you could move a car, bulky object, etc.

I would recommend a 1-ton truck instead of the 3/4 ton truck simply for its added payload, but you might run into the CDL problem. You can "help" a 3/4 ton with a squatting problem by adding helper airbags to the rear axle, but you still don't want to overload it. Personally, I run a 30 foot gooseneck behind an F-350 dually. Bumper pull can be move useful because it can be pulled by a number of vehicles. You definitely want a deckover for your purposes.
 
   / Gooseneck or bumper pull? #86  
I would go hands down with a gooseneck above a bumper pull. I have 3 ranging from 14' to 30'. They are much more forgiving when pulling and a lot more stable and easier to get into tight places.
IMO a bumper pull will follow a truck much better when pulling into tight places like narrow driveways , but I do feel like I can back a gooseneck into a tighter place.
 
   / Gooseneck or bumper pull? #87  
Which one is safer and more forgiving with respect to trailer load balancing?

Which one is easier to back up?

Looking at a 14-16k GVWR trailer.
Gooseneck is safer. Bumper pull will be a little easier to tow because the trailer follows your trucks turning radius where a gooseneck will take a turn tighter because it connects in the center of your bed. You can back up a goose neck into a tighter spot. Gooseneck still east to tow and safer.
 
   / Gooseneck or bumper pull? #88  
Which one is safer and more forgiving with respect to trailer load balancing?

Which one is easier to back up?

Looking at a 14-16k GVWR trailer.
Gooseneck is much better. I have a 40-foot gooseneck trailer for two cars and a 24-foot bumper pull for single car towing. The gooseneck is very stable, forgiving on load. More maneuverable for similar lengths.
 
   / Gooseneck or bumper pull? #89  
I would choose gooseneck. I have a 26 + 6 which gives me room to balance the load by moving it back or forward. It is a 25k trailer and I pull it with my 3/4 ton. More stable towing and easier to back are the bonuses.
 
   / Gooseneck or bumper pull? #90  
About 100 yrs ago my friends dad had mounted a ball hitch on the front bumper ( think it actually bolted to the frame) for backing his trailer way back in between the house and a fence. I use the skid steer with the trailer hitch QA plate.
I have front mounts on both my UTV's for that very reason.
 

Tractor & Equipment Auctions

Blue-Jet Liquid Fertilizer Applicator (A51039)
Blue-Jet Liquid...
Cyclone 4826 Sand Blast Cabinet (A50860)
Cyclone 4826 Sand...
2018 Honda Civic Sport Hatchback Sedan (A48082)
2018 Honda Civic...
2007 Ingersoll Rand P185 Air Compressor (A50860)
2007 Ingersoll...
2023 Jeep Grand Cherokee Limited 4x4 SUV (A48082)
2023 Jeep Grand...
2017 Ford F-450 Crew Cab Mason Dump Truck (A50323)
2017 Ford F-450...
 
Top