Popgadget
Elite Member
Why not put the air handler where the existing geo unit is?Will put AH in unfinished room upstairs (where current geo ducts pass through)
Is the geo a split system with the compressor and air handler separated?
Why not put the air handler where the existing geo unit is?Will put AH in unfinished room upstairs (where current geo ducts pass through)
to reclaim the space on first floor, and it shortens the duct work. a bunch of sheet metal work either place, I'd like to reclaim the space downstairs where geo sits for a larger pantry. room upstairs was going to be 2nd floor laundry, still plenty of room for that if I ever get to it.Why not put the air handler where the existing geo unit is?
Is the geo a split system with the compressor and air handler separated?a
Bill, I like that idea for at least todayToday is a day of rest and that is exactly what I am going to do. Now that I am retired I can treat every day that ends in 'day' as a Sunday.![]()
Dennis, my oldest son has decided that our Vermont house is to hot in the summer, so he went out and bought a system to handle 1500 sq ft. All the bedrooms have AC window units but the family room and kitchen dining area do not. So I think he is using Paul’s advice and buying a pump and other tools to do the job right rather than going with a pre charged line set. I told both sons I have room in my electrical panel to give them a separate 20 amp circuit. So we will see how that goes.Now looking at Mr Cool DIY
Hope all have a blessed and safe dayHowever, I’d suggest going even cheaper on the equipment and buy a vacuum pump, a basic manifold and a burnishing type flaring tool and making a proper installation.
it was Sunday morning with no traffic so this time I hogged up the whole road early and got rv stopped in aDrew, in your life time of driving and backing up anything bigger than your car, how many hole-in-ones have you got to your credit?
I can honestly say that with a semi and one trailer I have had a few, but with two trailers I can count the number of time I have succeeded on one hand.
Have a safe day all
Drew over the years I have 3 contacts made with the ISS. One voice and 2 digital (packet radio)have any of you HAM guys talked to the ISS yet?
that would make pretty cool entry on log book
but who could forget Buck Rogers calling:
Come in Mars
Come in Mars
on a special wavelength known only in Hollywood...
how does that work?Drew over the years I have 3 contacts made with the ISS. One voice and 2 digital (packet radio)

“When I woke up and looked at my phone there was a real-time precipitation alert on it from a couple of hours ago.
Looks like we got right around 0.25” … which is quite welcome and was very needed.
Of course it means the front lawn will need mowing again in the next couple of days.
Got temporary repair done on garage door before I went to bed last night.
Checked summer squash before I came in last night. Largest zucchini was almost 6”, two largest yellow squash were 6” and 7”. Have several more 3” to 4” long.
The larger ones should be ready to go in the next day or so, so I’ll get them picked, sliced up, blanched and vacuum sealed to go in the freezer. (Assuming I can locate the vacuum sealer)
Need to go through the rhubarb and see what can picked and put up as well.”

The voice procedure is just give call sign basically to acknowledge contact. The digital is automatic you make the connection and then disconnect. Been many years they may have changed that procedure now not sure. The digital required no involvement on their part it was thru a TNC/Radio setup.how does that work?
is protocol they can acknowledge you and that's all?
can't imagine they can yak away up there, discuss the Mets...
if they have time, can they engage with you?