Good morning!!!!

   / Good morning!!!! #197,401  
Thanks Scott and others. Will have to have a center for the pilot bit. Maybe wedge a piece of wood into the irregular shaped hole and hole saw it big enough to cover the hole and then use a 1/8 inch over to make the plug
Good suggestion
If you drill the desired hole into a 6x6 [or close] piece of 5/8 plywood you can attach that to the spot needing the plug and center it where desired. You can also take that board and clamp it to the donor board and drill straight thru without the centering bit. I did this to my house when I moved the outside faucet. Hope I explained it correctly!
50 here going to high 60's. Should be a nice day. Off to breakfast with the neighbor in a few hours.
Hope everyone stays safe and healthy!
 
   / Good morning!!!! #197,403  
If you drill the desired hole into a 6x6 [or close] piece of 5/8 plywood you can attach that to the spot needing the plug and center it where desired. You can also take that board and clamp it to the donor board and drill straight thru without the centering bit. I did this to my house when I moved the outside faucet. Hope I explained it correctly!
50 here going to high 60's. Should be a nice day. Off to breakfast with the neighbor in a few hours.
Hope everyone stays safe and healthy!
Great idea, follow you on how to do it. I have a few other places where plugs are needed and will use it there as well. A 200 year old house always has some challenges and finding workers that can help is like impossible
 
   / Good morning!!!! #197,404  
good morning all
56 in Edgewood NM going up to 72 today
I am off at 9am first to visit the Indian Museum in Santa Fe and then continuing North into Colorado to Alamosa. I see it was 37 last night there, brrr.
first lots of coffee.
 
   / Good morning!!!! #197,405  
61 this morning high in 70s more showers today nothing like last night raining over one inch per hour wild not sure of damage daylight coming. Wife had terrible day very angry.

Prayers for all our Country
 
   / Good morning!!!! #197,407  
Loading bales on the 10th cloudy drizzly day in a row....
Thinking & praying for my brothers & sisters in the path of Helene

1727783807512.jpeg
 
   / Good morning!!!! #197,408  
If you drill the desired hole into a 6x6 [or close] piece of 5/8 plywood you can attach that to the spot needing the plug and center it where desired. You can also take that board and clamp it to the donor board and drill straight thru without the centering bit. I did this to my house when I moved the outside faucet. Hope I explained it correctly!
50 here going to high 60's. Should be a nice day. Off to breakfast with the neighbor in a few hours.
Hope everyone stays safe and healthy!
That would be my suggestion also.
 

Tractor & Equipment Auctions

HARDEE RD72M LOT NUMBER 158 (A53084)
HARDEE RD72M LOT...
2019 Yamaha Electric Golf Cart (A51573)
2019 Yamaha...
2019 FORD F-150 XL SINGLE CAB TRUCK (A51406)
2019 FORD F-150 XL...
2014 DITCH WITCH RT45 RIDE ON TRENCHER (A51246)
2014 DITCH WITCH...
NEW Wolverine 72'' Skid Steer Sickle Bar Mower (A53002)
NEW Wolverine 72''...
2014 Doyle Dry Fertilizer Tender Trailer - Kubota Diesel, 3 Stainless Compartments, Side Discharge (A53472)
2014 Doyle Dry...
 
Top